manualshive.com logo in svg

Asus RS300-E10 Series, Руководство пользователя, Страница: 8 / 162

Поделиться
Скачать
Asus RS300-E10 Series Скачать руководство пользователя страница 8

viii

About this guide

Audience

This user guide is intended for system integrators, and experienced users with at least basic 

knowledge of configuring a server.

Contents

This guide contains the following parts:

1. 

Chapter 1: Product Introduction

This chapter describes the general features of the server, including sections on front 

panel and rear panel specifications.

2. 

Chapter 2: Hardware Setup

This chapter lists the hardware setup procedures that you have to perform when 

installing or removing system components.

3. 

Chapter 3: Installation Options

This chapter describes how to install optional components into the barebone server.

4. 

Chapter 4: Motherboard Information

This chapter gives information about the motherboard that comes with the server. This 

chapter includes the motherboard layout, jumper settings, and connector locations.

5. 

Chapter 5: BIOS Setup

This chapter tells how to change system settings through the BIOS Setup menus and 

describes the BIOS parameters.

6. 

Chapter 6: RAID Configuration

This chapter tells how to change system settings through the BIOS Setup menus. 

Detailed descriptions of the BIOS parameters are also provided.

7 

Chapter 7: Driver Installation

This chapter provides instructions for installing the necessary drivers for different 

system components.

Содержание RS300-E10 Series



































































































































































Отзывы:

Нет отзывов