Asus RS160-E4 - 0 MB RAM Скачать руководство пользователя страница 107

Страница: 107 / 144

ASUS RS160-S5/PX4

6-3

6.2

LSI Corporation MPT Setup Utility

The LSI Corporation MPT Setup Utility is an integrated RAID solution that allows

you to create the following RAID set(s) from SAS hard disk drives supported by the

LSI1068 PCI-X SAS controller:

•

RAID 1 (Integrated Mirroring)

•

RAID 1E (Integrated Mirroring Enhanced)

•

RAID 0 (Integrated Striping)

• You may use disks of different sized in IM and IME volumes; however, the

size of the smallest disk determines the “logical” size of each member disk.

• DO NOT combine Serial ATA and SAS disk drives in one volume.
• The RAID setup screens shown in this section are for reference only and

may not exactly match the items on your screen due to the controller

version difference.

6.2.1

Integrated Mirroring (IM) volume

The Integrated Mirroring (IM) feature supports simultaneous mirrored volumes with

two disks (IM).
The IM feature supports hot swap capability, so when a disk in an IM volume

fails, you can easily restore the volume, and the swapped disk is automatically re-

mirrored.
To create an IM volume:

1. Turn on the system after installing all SAS hard disk drives.

2. During POST, press <Ctrl+C> to enter the SAS configuration utility.

LSI Corporation MPT SAS BIOS

MPTBIOS-6.18.01.00 (2007.08.08)

Press Ctrl-C to start LSI Corp Configuration Utility...

Содержание RS160-E4 - 0 MB RAM

















































































































































Результаты поиска

Содержание RS160-E4 - 0 MB RAM

Отзывы:

Похожие инструкции для RS160-E4 - 0 MB RAM

Бренды по названию

Популярные бренды

Asus RS160-E4 - 0 MB RAM, Руководство пользователя

Результаты поиска

Содержание RS160-E4 - 0 MB RAM

Отзывы:

Похожие инструкции для RS160-E4 - 0 MB RAM

Бренды по названию

Популярные бренды