background image

Chapter 2:  Hardware setup

2-12

2.3.2 

Memory mirroring and sparing technology

The Intel

®

 5400 chipset supports the memory mirroring and sparing technology. 

Refer to the below sections:

Memory Mirroring:

When enabling memory mirroring function in the BIOS setting (please refer the 

section 

4.4.2 Chipset Configuration

 and configure the option

 Memory Branch 

Mode 

as

 Branch Mirroring

), Branch 1 contains a replicate copy of the data 

in Branch 0. The DIMMs must cover the same slot position on both branches. 

DIMMs that cover a slot position must be identical with respect to size, speed, 

and organization. DIMMs within a slot position must match each other, but aren’t 

required to match adjacent slot positions.

And the total memories size will be the half of all installed memories. 
The below two memory configurations were required to operate in mirrored mode.

1.  Configuration 1 (Mirroring): 

Four memories population

DIMM 00 (Slot 0:Channel 0)

MCH

Branch 0

DIMM 01 (Slot 1:Channel 0)

DIMM 10 (Slot 0:Channel 1)

DIMM 1

1 (Slot 1:Channel 1)

DIMM 20 (Slot 0:Channel 2)

DIMM 21 (Slot 1:Channel 2)

DIMM 30 (Slot 0:Channel 3)

DIMM 31 (Slot 1:Channel 3)

Branch 1 

(Mirror)

2.  Configuration 2 (Mirroring) :

 Eight memories population

DIMM 00 (Slot 0:Channel 0)

MCH

Branch 0

DIMM 01 (Slot 1:Channel 0)

DIMM 10 (Slot 0:Channel 1)

DIMM 1

1 (Slot 1:Channel 1)

DIMM 20 (Slot 0:Channel 2)

DIMM 21 (Slot 1:Channel 2)

DIMM 30 (Slot 0:Channel 3)

DIMM 31 (Slot 1:Channel 3)

Branch 1 

(Mirror)

Содержание RS160-E4 - 0 MB RAM

















































































































































Отзывы: