Asus PQ321QE Скачать руководство пользователя

Страница: 22 / 33

You can return the settings to their factory-preset values and

restrict operations.

1. Hold down the [MENU/ENTER] button and [RETURN]

button at the same time until “F” appears in the screen,

and then press the [MENU/ENTER] button and

[VOL-/ ] button at the same time while “F” appears.

▲

▲
▲

▲

OFF

UNLOCKED

ON 1

OFF

FUNCTION

ALL RESET

ADJUSTMENT LOCK

RS-232C

OSD DISPLAY

LED

TEMPERATURE ALERT

STATUS ALERT

END…[RETURN]

OK…[ENTER]

2. Select and set the items.

ALL RESET

Resets the settings to the factory default settings.

Select ALL RESET, and then press [MENU/ENTER]

button.

After initialization, turn the main power switch off and

then back on.
ALL RESET ......Resets all the settings to the factory

default settings.

CANCEL ...........Go back without resetting.

ADJUSTMENT LOCK

You can disable operations on the monitor buttons.

OFF ...Enables operation.

ON 1 ..Disables all operations other than turning power

on/off and FUNCTION.

ON 2 ..Only the FUNCTION operation is enabled.

Disables all operations other than FUNCTION (not

even power on/off).

RS-232C

Specifies whether to allow control via RS-232C. (See

page 23.)

OSD DISPLAY

Shows/hides the menu, modes and messages.

The FUNCTION screen cannot be hidden.

ON 1 .............. Shows all menus, modes and messages.

ON 2 .............. Hides messages automatically displayed

by the display. Shows messages during

operation.

OFF ............... Hides all menus, modes and messages.

LED

Specifies whether to light the power LED.

Initialization (Reset)/Functional Restriction Setting (FUNCTION)

TEMPERATURE ALERT

Selects the notification method for an abnormal

temperature.

OFF .............. Do not notify about an abnormal

temperature.

OSD & LED .. When an abnormal temperature is

detected, the power LED flashes in red

and green alternately and the screen

displays a message: TEMPERATURE.

LED............... When an abnormal temperature is

detected, the power LED flashes in red

and green alternately.

STATUS ALERT

Selects the notification method for a hardware error.

OFF .............. Do not notify about the error.

OSD & LED .. When a hardware error is detected, the

power LED flashes in red and the screen

displays a message: STATUS [xxxx].

LED............... When a hardware error is detected, the

power LED flashes in red.

3. Press [RETURN] button to return to the normal screen.

TIPS

• When both abnormal temperature and hardware error are

detected, the hardware error notification overrides.

• If TEMPERATURE ALERT or STATUS ALERT is set to

OSD & LED, alert messages will appear even if the OSD

DISPLAY is set to ON 2 or OFF.

• If TEMPERATURE ALERT or STATUS ALERT is set to LED

or OSD & LED, the LED lights even if the LED function is

set to OFF.

Содержание PQ321QE


































Результаты поиска

Содержание PQ321QE

Отзывы:

Похожие инструкции для PQ321QE

Бренды по названию

Популярные бренды

Asus PQ321QE, Руководство пользователя

Результаты поиска

Содержание PQ321QE

Отзывы:

Похожие инструкции для PQ321QE

Бренды по названию

Популярные бренды