Asus P5W DH Скачать руководство пользователя страница 152

Страница: 152 / 212

5-2

Chapter 5: Software support

5.3.5

ASUS Music Alarm

This motherboard is equipped with an audio alarm clock called ASUS Music Alarm.

The ASUS Music Alarm gives you a personal wake-up called with your favorite CD

music when the system is off. The onboard audio CODEC supports this feature,

which requires an optical drive (CD-ROM, CD-RW, or DVD-ROM).

• Make sure that the power cord is plugged to a grounded power source so

that the system has standby power.

• ASUS Music Alarm only supports audio CDs.
• ASUS Music Alarm will not work if you installed and enabled an add-on

sound card.

• Only IDE ATAPI devices from the Southbridge support this feature.

Hardware setup

To set up the hardware:

1. Connect the analog audio cable from the optical drive to the 4-pin CD-In

connector labeled CD on the motherboard. See section “2.7.2 Internal

connectors” for the connector location.

2. Connect speakers or a headphone to the Line-Out (lime-colored) port on

the front or rear panel for audio output. You may also connect speakers or a

headphone to the output jack on the optical drive.

3. Refer to the succeeding sections to make the appropriate settings in the

BIOS or in Windows

BIOS configuration

To enable ASUS Music Alarm in the BIOS:

1.  Turn on the system.
2.  During POST, press <Del> to enter BIOS setup.
3.  Go to the

Tools

menu, then select

ASUS Music Alarm

4. Set the

ASUS Music Alarm

item to [Enabled]. See section “4.7.1 ASUS

Music Alarm” for details.

Содержание P5W DH





















































































































































































































Результаты поиска

Содержание P5W DH

Отзывы:

Похожие инструкции для P5W DH

Бренды по названию

Популярные бренды

Asus P5W DH, Руководство пользователя

Результаты поиска

Содержание P5W DH

Отзывы:

Похожие инструкции для P5W DH

Бренды по названию

Популярные бренды