Asus ESC8000 4G Series Скачать руководство пользователя страница 8

Страница: 8 / 186

viii

Safety information

Electrical Safety

•

Before installing or removing signal cables, ensure that the power cables for the system

unit and all attached devices are unplugged.

• To prevent electrical shock hazard, disconnect the power cable from the electrical outlet

before relocating the system.

•

When adding or removing any additional devices to or from the system, ensure that the

power cables for the devices are unplugged before the signal cables are connected. If

possible, disconnect all power cables from the existing system before you add a device.

• If the power supply is broken, do not try to fix it by yourself. Contact a qualified service

technician or your dealer.

Operation Safety

• Any mechanical operation on this server must be conducted by certified or experienced

engineers.

•

Before operating the server, carefully read all the manuals included with the server

package.

•

Before using the server, ensure all cables are correctly connected and the power cables

are not damaged. If any damage is detected, contact your dealer as soon as possible.

•

To avoid short circuits, keep paper clips, screws, and staples away from connectors,

slots, sockets and circuitry.

•

Avoid dust, humidity, and temperature extremes. Place the server on a stable surface.

Lithium-Ion Battery Warning

CAUTION!

Danger of explosion if battery is incorrectly replaced. Replace only with

the same or equivalent type recommended by the manufacturer. Dispose of used

batteries according to the manufacturer’s instructions.

Heavy System

CAUTION!

This server system is heavy. Ask for assistance when moving or carrying

the system.

This product is equipped with a three-wire power cable and plug for the user’s safety. Use

the power cable with a properly grounded electrical outlet to avoid electrical shock.

CLASS 1 LASER PRODUCT

Содержание ESC8000 4G Series



























































































































































































Результаты поиска

Содержание ESC8000 4G Series

Отзывы:

Похожие инструкции для ESC8000 4G Series

Бренды по названию

Популярные бренды

Asus ESC8000 4G Series, Руководство пользователя

Результаты поиска

Содержание ESC8000 4G Series

Отзывы:

Похожие инструкции для ESC8000 4G Series

Бренды по названию

Популярные бренды