Asus A8S-X Скачать руководство пользователя

Страница: 42 / 78

2-2

Chapter 2: BIOS Setup

2.1 Managing and updating your BIOS

The following utilities allow you to manage and update the motherboard

Basic Input/Output System (BIOS) setup.

1. ASUS AFUDOS - Updates the BIOS using a bootable ﬂoppy disk in DOS

mode.

2. ASUS EZ Flash - Updates the BIOS using a ﬂoppy disk during POST.
3. ASUS CrashFree BIOS 2 - Updates the BIOS using a bootable ﬂoppy

disk or the motherboard support CD.

Refer to the corresponding sections for details on these utilities.

2.1.1 Creating a bootable floppy disk

1. Do either one of the following to create a bootable ﬂoppy disk.

DOS environment

a. Insert a 1.44MB ﬂoppy disk into the drive.
b. At the DOS prompt, type format

A:/S

then press <Enter>.

Windows

XP environment

a. Insert a 1.44 MB ﬂoppy disk to the ﬂoppy disk drive.
b. Click Start from the Windows

desktop, then select My Computer.

c. Select the 3 1/2 Floppy Drive icon.
d. Click File from the menu, then select Format. A Format 3 1/2

Floppy Disk window appears.

e. Select Create an MS-DOS startup disk from the format options

ﬁeld, then click Start.

Windows

2000 environment

To create a set of boot disks for Windows

2000:

a. Insert a formatted, high density 1.44 MB ﬂoppy disk into the

drive.

b. Insert the Windows

2000 CD to the optical drive.

c. Click Start, then select Run.

Save a copy of the original motherboard BIOS ﬁle to a bootable ﬂoppy

disk in case you need to restore the BIOS in the future. Copy the original

motherboard BIOS using the ASUS Update or AFUDOS utilities.

Содержание A8S-X















































































Результаты поиска

Содержание A8S-X

Отзывы:

Похожие инструкции для A8S-X

Бренды по названию

Популярные бренды

Asus A8S-X, Руководство пользователя

Результаты поиска

Содержание A8S-X

Отзывы:

Похожие инструкции для A8S-X

Бренды по названию

Популярные бренды