Asus A8S-X Скачать руководство пользователя

Страница: 46 / 78

2-6

Chapter 2: BIOS Setup

Make sure that the BIOS ﬁle in the ﬂoppy disk is renamed as

“A8S-XSE.ROM”.

2.1.5 Recovering the BIOS with CrashFree BIOS 2

The CrashFree BIOS 2 auto recovery tool allows you to restore BIOS from

the motherboard support CD, or from a ﬂoppy disk that contains the BIOS

ﬁle, in case the current BIOS on the motherboard fails or gets corrupted.

To recover the BIOS from a ﬂoppy disk:

1. Boot the system.
2. When a corrupted BIOS is detected, the following screen message

appears

Bad BIOS checksum. Starting BIOS recovery...

Checking for ﬂoppy...

• Prepare the support CD that came with the motherboard or a ﬂoppy

disk that contains the motherboard BIOS before proceeding with the

BIOS update process.

• If you have saved a copy of the original motherboard BIOS to a

bootable ﬂoppy disk, you may also use this disk to restore the BIOS.

See section “2.1.1 Creating a bootable ﬂoppy disk.”

3. Insert a ﬂoppy disk that contains the original or the latest BIOS ﬁle for

this motherboard. If all the necessary ﬁles are found in the ﬂoppy disk,

the BIOS update process continues

User recovery requested. Starting BIOS recovery...

Checking for ﬂoppy...

Floppy found!

Reading ﬁle “A8S-XSE.ROM”. Completed.

Start ﬂashing...
Flashed successfully. Rebooting.

DO NOT shutdown or reset the system while updating the BIOS! Doing so

may cause system boot failure!

Содержание A8S-X















































































Результаты поиска

Содержание A8S-X

Отзывы:

Похожие инструкции для A8S-X

Бренды по названию

Популярные бренды

Asus A8S-X, Руководство пользователя

Результаты поиска

Содержание A8S-X

Отзывы:

Похожие инструкции для A8S-X

Бренды по названию

Популярные бренды