Asus A8S-X Скачать руководство пользователя

Страница: 40 / 78

1-28

Chapter 1: Product introduction

The System Panel connector is color-coded for easy and foolproof

connection. Take note of the speciﬁc connector colors as described.

12. System panel connector (10-1 pin PANEL)

This connector accommodates several system front panel functions.

• System Power LED Lead (Green 3-pin PLED)
This 3-pin connector connects to the system power LED. The LED

lights up when you turn on the system power, and blinks when the

system is in sleep mode.

• System Warning Speaker Lead (Orange 4-pin SPEAKER)
This 4-pin connector connects to the case-mounted speaker and

allows you to hear system beeps and warnings.

• Reset Switch Lead (Blue 2-pin RESET)

This 2-pin connector connects to the case-mounted reset switch for

rebooting the system without turning off the system power.

• ATX Power Switch / Soft-Off Switch Lead

(Yellow 2-pin PWRSW )

This connector connects a switch that controls the system power

Pressing the power switch turns the system between ON and SLEEP, or

ON and SOFT OFF, depending on the BIOS or OS settings. Pressing the

power switch while in the ON mode for more than 4 seconds turns the

system OFF.

• Hard disk activity LED (Red 2-pin IDE_LED)
This connector supplies power to the hard disk activity LED. Any read

or write activity of an IDE device cause this LED to light up.

A8S-X SE

A8S-X SE System Panel Connector

Requires an ATX power supply.

PLED

RESET

IDE_LED

SPEAKER

PWRSW

PANEL

Содержание A8S-X















































































Результаты поиска

Содержание A8S-X

Отзывы:

Похожие инструкции для A8S-X

Бренды по названию

Популярные бренды

Asus A8S-X, Руководство пользователя

Результаты поиска

Содержание A8S-X

Отзывы:

Похожие инструкции для A8S-X

Бренды по названию

Популярные бренды