background image

 
                 
 

                     FCC Compliance Statement: 

This equipment has been tested and found to 
comply with limits for a Class B digital device, 
pursuant to Part 15 of the FCC rules. These 
limits are designed to provide reasonable 
protection against harmful interference in 
residential installations. This equipment 
generates, uses, and can radiate radio 
frequency energy, and if not installed and used 
in accordance with the instructions, may cause 
harmful interference to radio communications. 
However, there is no guarantee that interference 
will not occur in a particular installation. If this 
equipment does cause interference to radio or 
television equipment reception, which can be 

determined by turning the equipment off and on, the user is encouraged to try to 
correct the interference by one or more of the following measures: 

-Reorient or relocate the receiving antenna 

-Move the equipment away from the receiver 

-Plug the equipment into an outlet on a circuit different from that to which 
the receiver is connected 

-Consult the dealer or an experienced radio/television technician for 
additional suggestions 

You are cautioned that any change or modifications to the equipment not 
expressly approve by the party responsible for compliance could void Your 
authority to operate such equipment. 

This device complies with Part 15 of the FCC Rules. Operation is subjected to 
the following two conditions 1) this device may not cause harmful interference 
and 2) this device must accept any interference received, including interference 
that may cause undesired operation.      

 

DECLARATION OF CONFORMITY

 

Per FCC Part 2 Section 2. 1077(a) 

Responsible Party Name: G.B.T. INC.

 

Address: 18305 Valley Blvd., Suite#A

 

LA Puent, CA 91744

 

Phone/Fax No: (818) 854-9338/ (818) 854-9339

 

hereby declares that the product

Product Name: 

Model Number:

Mother Board 

Conforms to the following specifications: 

FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a), 
Class B Digital Device

Supplementary Information:

This device complies with part 15 of the FCC Rules. Operation is subject to the 
following two conditions:      (1)      This device may not cause harmful 
and   (2)   this device must accept any inference received, including 
that may cause undesired operation. 

Representative Person's Name:   ERIC LU 

Signature:

Date:    Nov. 22, 2000 

Eric Lu

 

   

GA-6OXC 

Содержание GA-6OXC


















































































































Отзывы: