5 - 1 6
5 - 1 6
5 - 1 6
5 - 1 6
5 - 1 6
C h a p t e r 5 : B I O S s e t u p
C h a p t e r 5 : B I O S s e t u p
C h a p t e r 5 : B I O S s e t u p
C h a p t e r 5 : B I O S s e t u p
C h a p t e r 5 : B I O S s e t u p
The AHCI allows the onboard storage driver to enable advanced Serial
ATA features that increases storage performance on random workloads
by allowing the drive to internally optimize the order of commands.
If you want the Serial ATA hard disk drives to use the Advanced Host Controller
Interface (AHCI), set this item to [AHCI]. For details on AHCI, go to:
www.intel.com/support/chipsets/imst/sb/CS-012304.htm
www.intel.com/support/chipsets/imst/sb/CS-012305.htm
The SATA controller is set to Native mode when this item is set to [RAID] or
[AHCI].
Onboard SATA RAID ROM [Disabled]
Allows you to enable or disable the onboard SATA RAID boot ROM.If
you would like to configure the SATA RAID, please set this option to
“Enabeld”. Configuration options: [Disabled] [Enabled]
The O n b o a r d S A T A R A I D R O M
O n b o a r d S A T A R A I D R O M
O n b o a r d S A T A R A I D R O M
O n b o a r d S A T A R A I D R O M
O n b o a r d S A T A R A I D R O M item appears only when you set the
C o n f i g u r e S A T A A s
C o n f i g u r e S A T A A s
C o n f i g u r e S A T A A s
C o n f i g u r e S A T A A s
C o n f i g u r e S A T A A s item to [RAID]. If the S A T A R A I D R O M
S A T A R A I D R O M
S A T A R A I D R O M
S A T A R A I D R O M
S A T A R A I D R O M disabled,
the RAID utility won’t appear during POST.
Legacy IDE Channels [SATA Pri, PATA Sec]
Allows you to set Serial ATA, Parallel ATA, or both, to legacy mode.
Configuration options:
• [SATA Only] - SATA1, SATA2, SATA3, and SATA4 ports are available
• [PATA Pri, SATA Sec] - PATA, SATA2, and SATA4 ports are available
• [SATA Pri, PATA Sec] - SATA1, SATA3, and PATA ports are available
• [PATA Only] - Only PATA ports are available
The Legacy IDE Channels
Legacy IDE Channels
Legacy IDE Channels
Legacy IDE Channels
Legacy IDE Channels option appears only when you set the A T A
A T A
A T A
A T A
A T A/////I D E
I D E
I D E
I D E
I D E
C o n f i g u r a t i o n
C o n f i g u r a t i o n
C o n f i g u r a t i o n
C o n f i g u r a t i o n
C o n f i g u r a t i o n item to [Compatible] mode.
IDE Detect Time Out (Sec) [35]
IDE Detect Time Out (Sec) [35]
IDE Detect Time Out (Sec) [35]
IDE Detect Time Out (Sec) [35]
IDE Detect Time Out (Sec) [35]
Selects the time our value (in seconds) for detecting ATA/ATAPI devices.
Configuration options: [0] [5] [10] [15] [20] [25] [30] [35]
(RAID Mode)
IDE Configuration
ATA/IDE Configuration
[Enhanced]
Configure SATA As
[RAID]
Onboard SATA RAID ROM
[Disabled]
Primary IDE Master
:
[ATAPI CD-ROM]
Primary IDE Slave
:
[Not Detected]
IDE Detect Time Out (Sec)
[35]
BIOS SETUP UTILITY
Main
Set[Compatible Mode]
when Legacy OS(i.e.
WIN Me, 98, NT4.0, MS
DOS)is used.
Set[Enhanced Mode]
when Native OS(i.e.
Win2000, WIN XP)is
used.
