A S U S R S 1 2 0 - E 3 / P A 4
A S U S R S 1 2 0 - E 3 / P A 4
A S U S R S 1 2 0 - E 3 / P A 4
A S U S R S 1 2 0 - E 3 / P A 4
A S U S R S 1 2 0 - E 3 / P A 4
6 - 2 3
6 - 2 3
6 - 2 3
6 - 2 3
6 - 2 3
6.2.5
6.2.5
6.2.5
6.2.5
6.2.5
Rebuilding failed drives
Rebuilding failed drives
Rebuilding failed drives
Rebuilding failed drives
Rebuilding failed drives
You can manually rebuild failed hard disk drives using the R e b u i l d
R e b u i l d
R e b u i l d
R e b u i l d
R e b u i l d command
in the Management Menu.
To rebuild a failed hard disk drive:
1.
From the Management Menu, highlight R e b u i l d
R e b u i l d
R e b u i l d
R e b u i l d
R e b u i l d, then press <Enter>.
2.
The P H Y S I C A L D R I V E S S E L E C T I O N M E N U
P H Y S I C A L D R I V E S S E L E C T I O N M E N U
P H Y S I C A L D R I V E S S E L E C T I O N M E N U
P H Y S I C A L D R I V E S S E L E C T I O N M E N U
P H Y S I C A L D R I V E S S E L E C T I O N M E N U displays the available
drives connected to the SATA ports. Select the drive you want to rebuild,
then press <SpaceBar>.
