manualshive.com logo in svg

AstroNova QuickLabel QL800, Руководство пользователя, Страница: 153 / 172

Поделиться
Скачать
AstroNova QuickLabel QL800 Скачать руководство пользователя страница 153

External Unwinder

QL-800 User Guide

153

 

7

With help from another person, lift the printer and then place it on the brackets.

Caution:

The printer is heavy and moving it requires two people. One person should lift 

the front by the indicated lift point, while the other person should lift the back by the 
indicated lift point. Do not lift the printer by the mandrel. Lift the front of the printer by the 
recessed handle. Lift the rear of the printer by the flat area of the purple frame above the 
mandrel. Keep the printer level while lifting it.

The printer should sit level on the brackets as shown. The front of the printer should make 
contact with the raised tab on the bracket.

8

Plug the power jack into the power slot on the unwinder. Insert the power plug into an AC 
power receptacle.

9

On the rear of the printer, turn the power inlet switch on. Power on the printer.

10

Use the 

After Moving

 feature in the 

Cleaning

 tab of the QL-800 Maintenance Utility. This 

utility will prepare the printer for printing. 

See “Preparing for Moving” on page 77.

Содержание QuickLabel QL800













































































































































































Отзывы:

Нет отзывов