Seite 19
Network settings
Betriebsanleitung QAM BOX -
Version 01-2013A
LCN table
Use the arrow buttons in the “Sort” column to move individual services further up or down in the list.
Once you have selected the preferred option, click on “Submit” to save the selection. Click on the “Reset
Form” button to delete the values which were entered beforehand.
Network settings
To have the network settings displayed, click on “Network” in the menu at the left. You will then see the
following overview:
Figure 19: Network settings
You can check or set the following properties in detail:
IP Interface settings
MAC:
shows the MAC address.
Mode:
displays the available bandwidth (100 Mbit/s).
Address:
shows the IP address (can only be edited when logged in as Admin).
Subnet:
shows the subnet mask (can only be edited when logged in as Admin).
Broadcast:
broadcast address of the subnet. This may not be used as the IP address of the
device.
Gateway:
interface to the internet (e.g. IP address of the router).
DNS:
name server; input required when e.g. updates are to be deployed using the FTP server
(“ftp.astro-firmware.de”).
/05&
:
Input fields shown in grey can only be edited when you are logged in as Admin-
istrator.
Содержание QAM BOX
Страница 1: ...Version 01 2013A...
