Configuring output properties
Betriebsanleitung QAM BOX -
Version 01-2013A
Seite 14
Output properties
You can enter the following properties manually in the “Output Settings” table:
Modulation:
select the required modulation from the drop-down list; the options available are
“64 QAM”, “256 QAM” (see the “QAM channels” table further above).
Symbol rate:
you can modify the output symbol rate here by entering the required value (in
kBaud) in the input field.
Apply settings to all channels:
tick the checkbox if you wish to apply the values entered
to all the QAM channels.
Save the changes by clicking on the “Submit” button. Delete any settings entered previously by clicking
on the “Reset Form” button.
Setting FM channels
To configure the FM channels, click on the entry
FM Channels
in the menu at the left. You can now
see the input screen shown in figure 13:
Figure 13: Setting FM channels
You can make the settings for the 16 radio stations in the “FM Channels” table (see figure 14, below).
Figure 14: Setting FM channels (excerpt)
Содержание QAM BOX
Страница 1: ...Version 01 2013A...
