Providing the Astronomical Community with Premier
Products and Services
Astro-smart.com Copyright
© 2010-2049, All rights reserved
Oct 2020
Page 45
M.
RF Interface.
When using the SMP-R2-RF system, please note RF dongle module driver installation instructions as per below.
1.
WIN7 Family OS:
i.
OS should detect all modules and no need for installation. The drivers will be recognized for
the com port as either Silicon Labs CP210x or Prolific PL2303 type.
2.
WIN10 Family OS:
i.
OS should detect all modules and no need for installation, which have CP210X style
hardware dongles.
ii.
Dongles with Prolific PL2303 type need to install a driver provided with instructions per
video link below.
iii.
https://www.youtube.com/watch?v=aWquKi_e-3A
N.
Specifications
requires the following:
At a minimum of 12 Volts DC at 2 amps a 2.1 mm DC power connector on your AC/DC supply.
Center positive voltage, sleeve ground, sees Figure 1.
Positive (+)
12VDC
Grounded Sleeve
