Astralpool Viron Connect 10, Инструкция по установке и эксплуатации

Страница: 71 / 76

71
If the status is shown as ‘?’, then the Touchscreen cannot communicate with the Internet Gateway. Check that
the Internet Gateway is plugged in to the pool system, using normal flat-­‐cable RJ12 connection, and that the
plugs of the RJ12 cable have the correct orientation.
The ‘status’ field will show a numerical code and a text explanation. See the table below for more information.
The two most common codes you will see are 32769 and 61440. These codes indicate that the connection to
the server is open/closed normally. Other codes may indicate a fault condition, or be “connection in progress”
codes.
If you need to update the information on the screen, press ‘Refresh’. If you wish to force the Internet Gateway
to recommence the connection sequence, press ‘Reconnect’. Note that the internet Gateway will periodically
attempt reconnection automatically (typically 30 seconds, but the pool owner can adjust this through the
myPool Remote website).