Astralpool Viron Connect 10, Инструкция по установке и эксплуатации

Страница: 34 / 76

34
Connect controller.
13) Repeat step 11 for each additional channel you have allocated in the system.
14) If you have selected a Genus gas heater and variable speed pump, you will be asked for a
minimum “Heater On” speed. This setting will dictate the speed your pump will operate on
when the heater is in the on setting (this is different to when the heater is actually running).
This speed should be set to ensure your gas heater is receiving sufficient water to activate
the pressure switch.
15) Once you have completed the channel allocations you can program the operation of the 2
auxiliary valves. These valves operate independent of all other controls and can be used for
solar, water features, draining your pool or any other use that you would normally have to
control by a manual valve.