Astralpool 32505 Скачать руководство пользователя страница 55

Страница: 55 / 56

Pag: 55

It declares under its sole responsibility that all the heat pumps referred to as OPTIMA / MAYA

manufactured since 11/02/2019, regardless of their serial number, are compliant with:

Bescheinigt in alleiniger Verantwortung, dass alle elektrische Wärmetauscher des Typs:

OPTIMA / MAYA

Richtlinie über Maschinensicherheit 2006/42/UE.

Richtlinie über elektromagnetische Verträglichkeit 2014/30/UE und ihren Änderungen

Richtlinie über Geräte mit Niederspannung 2014/35/UE.

Richtlinie 2000/14/UE über umweltbelastende Geräuschemissionen von zur Verwendung im Freien vorgesehenen Geräten und

Maschinen, und zuletzt geändert durch die Richtlinie 2005/88/UE.

Richtlinie 2011/65/UE zur Beschränkung der Verwendung bestimmter gefährlicher Stoffe in Elektro- und Elektronikgeräten (RoHS)

Richtlinie 2012/19/UE über Elektro- und Elektronik-Altgeräte.

Spanisch Königliches Dekret 208/2005 und 219/2013 über die Elektro-und Elektronik-Altgeräte und die Bewältigung ihrer Abfälle.

Verordnung (UE) Nr. 1907/2006 zur Registrierung, Bewertung, Zulassung und Beschränkung chemischer Stoffe (REACH) , und zuletzt

geändert durch die Richtlinie 126/2013.

Dichiara sotto la sua diretta responsabilità che tutti gli scambiatori di calore elettrici del tipo:

OPTIMA / MAYA

Direttiva sulla sicurezza macchine 2006/42/UE.

Direttiva sulla compatibilità elettromagnetica 2014/30/UE, e relative modifiche.

Direttiva sui dispositivi a bassa tensione 2014/35/UE.

Direttiva 2000/14/UE sulle emissione acustica ambientale delle macchine ed attrezzature destinate a funzionare all'aperto e la sua

correzione con la direttiva 2005/88/UE.

Direttiva 2011/65/UE sulla restrizione dell'uso di determinate sostanze pericolose nelle apparecchiature elettriche ed elettroniche

(RoHS).

Direttiva 2012/19/UE sui rifiuti di apparecchiature elettriche ed elettroniche (RAEE).

Spagnolo Regio Decreto 208/2005 ed 219/2013 sulle apparecchiature elettriche ed elettroniche e la gestione dei loro rifiuti.

Regolamento (UE) Nº 1907/2006 concernente la registrazione, la valutazione, l’autorizzazione delle sostanze chimiche (REACH) e la

sua correzione con la direttiva 126/2013.

Declara sob sua única responsabilidade que todos aquecedores eléctricos do tipo:

OPTIMA / MAYA

A Directiva de segurança de máquinas 2006/42/UE.

A Directiva de compatibilidade electromagnética 2014/30/UE, e suas modificações.

Directiva de equipamentos de baixa tensão 2014/35/UE.

Directive 2000/14/UE relativa à Emissões sonoras para o ambiente dos equipamentos para utilização no exterior, alterada pela Directiva 2005/88/UE.

Directiva 2011/65/UE relativa à restrição do uso de determinadas substâncias perigosas em equipamentos eléctricos e electrónicos (RoHS).

Directiva 2012/19/UE relativa aos resíduos de equipamentos eléctricos e electrónicos (REEE).

Espanhol Real Decreto 208/2005 e 219/2013, em equipamentos eléctricos e electrónicos e gestão dos seus resíduos.

Regulamento (UE) N.o 1907/2006 relativo ao registo, avaliação, autorização e restrição dos produtos químicos (REACH) alterada pela Directiva

126/2013.

Signed the present conformity evidence / Signe la présente déclaration / Firma la presente declaración /

Firma la seguente dichiarazione/ Unterzeichnet diese Erklärung / Assina a presente declaração:

Los Corrales de Buelna 11/02/2019 Signature / Firma/ Unterschrift / Assinatura

Mr. Jose Manuel Aquilue, Chief Executive Officer of B-39390968

Содержание 32505
























































Результаты поиска

Содержание 32505

Отзывы:

Похожие инструкции для 32505

Бренды по названию

Популярные бренды

Astralpool 32505, Техническое руководство. Запуск и эксплуатация.

Результаты поиска

Содержание 32505

Отзывы:

Похожие инструкции для 32505

Бренды по названию

Популярные бренды