Astralpool 32505 Скачать руководство пользователя

Страница: 54 / 56

Pag: 54

It declares under its sole responsibility that all the heat pumps referred to as OPTIMA / MAYA

manufactured since 01/01/2019, regardless of their serial number, are compliant with:

Declares under their own responsibility that all the heatpumps: OPTIMA / MAYA

Machine safety directive 2006/42/UE.

Electromagnetic compatibility directive 2014/30/UE and its modifications.

Low-voltage equipment directive 2014/35/UE.

Directive 2000/14/UE concerning noise produced by equipment for outdoors use, as amended by Directive 2005/88/UE.

Restrictions in the use of certain risky substances in the electrical and electronic instruments 2011/65/UE (RoHS).

Relative to the electrical and electronic waste products 2012/19/UE (RAEE).

Relative to the electrical and electronic instruments and the management of their waste products Spanish R.D. 208/2005 and

219/2013.

The registration, the evaluation, the authorization and the restriction of the chemical substances UE Nº 1907/2006 (REACH) as

amended by Directive 126/2013 (REACH).

Declara bajo su única responsabilidad que todos los intercambiadores de calor eléctricos del tipo:

OPTIMA / MAYA

Directiva de seguridad de máquinas 2006/42/UE.

Directiva de compatibilidad electromagnética 2014/30/UE, y sus modificaciones.

Directiva de equipos de baja tensión 2014/35/UE.

Directiva sobre el ruido producido por máquinas para uso exterior 2000/14/UE y su corrección con la Directiva 2005/88/UE.

Directiva sobre restricciones a la utilización de determinadas sustancias peligrosas en aparatos eléctricos y electrónicos 2011/65/UE

(RoHS).

Directiva sobre residuos de aparatos eléctricos y electrónicos 2012/19/UE (RAEE).

Real Decreto 208/2005 y 219/2013 sobre aparatos eléctricos y electrónicos y la gestión de sus residuos.

Reglamento relativo al registro, la evaluación, la autorización y la restricción de las sustancias y preparados químicos UE Nº

1907/2006 (REACH) y su corrección con la Directiva 126/2013 (REACH).

Déclare sous sa seul responsabilité que toutes les échangeurs de chaleur éléctriques du type:

OPTIMA / MAYA

Electricheat Excahanger Directive de sécurité de machines 2006/42/UE.

Directive de compatibilité électromagnétique 2014/30/UE, et ses modifications.

Directive d’appareils de basse tension 2014/35/UE.

Directive 2000/14/UE sur les émissions sonores du matériel destiné à l’extérieur, et sa correction à la directive 2005/88/UE.

Directive relative à la limitation de l'utilisation de certaines substances dangereuses dans les équipements électriques et

électroniques 2011/65/UE (RoHS).

Directive relative aux déchets d'équipements électriques et électroniques 2012/19/UE (DEEE).

Espagnol Décret Royal 208/2005 et 219/2013 sur les équipements électriques et électroniques et la gestion de leurs déchets.

Règlement concernant l'enregistrement, l'évaluation et l'autorisation des substances chimiques, ainsi que les restrictions applicables

à ces substances (UE) nº 1907/2006 (REACH) et sa correction à la directive 126/2013 (REACH).

Los Corrales de Buelna 11/02/2019 Signature / Firma/ Unterschrift / Assinatura

Sr. Aquilue. Chief Executive Officer of B-39390968

Содержание 32505
























































Результаты поиска

Содержание 32505

Отзывы:

Похожие инструкции для 32505

Бренды по названию

Популярные бренды

Astralpool 32505, Техническое руководство. Запуск и эксплуатация.

Результаты поиска

Содержание 32505

Отзывы:

Похожие инструкции для 32505

Бренды по названию

Популярные бренды