Astoria Gloria AEP, Инструкция для пользователя

Страница: 192 / 296

44
English
DISPLAY - ASD / DS
Service not active.
BOILER PRESSURE
0.0 bar is=0.0
14.6 BOILER PRESSURE programming
The actual temperature of the beverage may differ by a few degrees from the set temperature
depending on the amount of the beverage heated.
i
autosteamer
65°C
Programming the activation temperature of the autosteamer:
1) Enter programming until showing on the display;
2) set the temperature with the keys of the left push button panel;
3) to move to the subsequent programming press the key MODE .
14.7 AUTOSTEAMER TEMPERATURE programming
CUP HEATER
80°C
Temperature programming and activation of cup heater:
1) Enter programming until showing on the display;
2) set the temperature (70-100°C) with the keys ;
3) press the MODE key to move on to the next programming.
14.8 CUP HEATER programming
When the machine reaches 90% of the value set on the display a signal appears for 5 seconds. When the
machine reaches 100% of the value set on the display a blinking signal appears.
To eliminate the blinking signal and reset the count of the litres of water to zero, with the programming
key in the ON position press the
4 keys of the left push button panel simultane-
ously until the display shows the message "
00000
".
The regeneration control is bypassed by setting a value equal to 00000 litres.
i
Programming of the automatic warning of water softener regeneration:
1) Enter programming until showing on the display;
2) set the amount of water (steps of 50 litres) with the keys ;
3) to move to the subsequent programming press the key MODE .
14.5 WATER SOFTENER REGENERATION programming
reg. softener
00000