Astoria Gloria AEP, Инструкция для пользователя

Страница: 174 / 296

26
English
SAE - DISPLAY
Turn the programming key ( 3 ) to ON (
P
flashes on the display).
Keep the MODE key of the right push button panel pressed for at least
3 seconds to have access to programming.
Use the MODE key of the right hand push button panel
to scroll the
various areas of the programming menu.
Use the ENTER key of the right hand push button panel to move from
a parameter to the next one within the same area.
To modify the value of each parameter, use the increase and decrease
keys of the right hand push button panel
The system automatically exits the programming phase a few
seconds after the last operation carried out. When programming
is finished, turn the programming key back on OFF .
The programming of the electronic push button panel can be car-
ried out only when the programming switch is on ON .
i
clock set-up
09:16 18-02-05 1
auto on/off
on 08:50
working days
1 2 3 4 5 6 7
reg. softener
00000000
cup heater
80°c
language
English
auto on/off
off 18:50
doser alarm
000 000 000
boiler pressure
0.0 bar is=0.0
1.0 bar 120°C P
09:16 09-02-04 1
10.
P
rogamming of machine parameters
r
o g
r o
g
3
To activate, deactivate or adjust the cup heater, turn the cup heater switch placed above the turn on machine
switch to
ON (with the programming key on OFF) and proceed as follows:
• Hold down the key PROG of the right hand push button panel for 5 seconds;
• Press again the PROG switch displaying the message
• Use the increase (
+
) and decrease (
-
) keys of the right push button panel to modify the temperature
of the cup heater shown on the display;
• keep the PROG key pressed to confirm the operation.
cup heater
80°C
To deactivate the cup heater set a temperature lower than 70°C (the display shows ---- ) or turn the
heater switch on OFF (placed above the machine start switch).
i
9.
C
up heater