Astoria Gloria AEP, Инструкция для пользователя

Страница: 186 / 296

38
English
DISPLAY - ASD / DS
1) Insert the aspiration tube into the milk container;
2) For cappuccino, coffee and milk or milk with a shot of coffee, fill the filter with the dose
of ground coffee and press it with the coffee press;
3) Attach the filter holder to the dispenser assembly;
4) Place the cup under the filter holder;
5) Select the desired serving and wait for completion of milk and coffee (the latter only for
cappuccino, coffee and milk or milk with a shot of coffee).
Cappuccino Latte
Foamed
Milk
Hot
Milk
Latte
Macchiato
Auto
Steamer
Additional
Hot Milk
To stop delivery ahead of time, press the selected key again.
If the dose consists of coffee and milk, press the selected key repeatedly until the cycle is com-
pletely interrupted. For manual delivery of warm milk, press the key .
To interrupt dispensing of warm milk, press again the key .
i
Additional
Hot Milk
Additional
Hot Milk
10.1 Use
Program the milk selections push button panel in the following way:
• Turn the programming key to the ON position (
P
flashes on the display);
• Hold the PROG key down on the left push button panel for at least 5 seconds (all LED on the push button
panels come on);
10.2 Programming coffee doses
• Fill the filter with the desired dose of ground coffee, press it with the coffee presser and attach the filter holder to the delivery group;
• Select the dose to be programmed (e.g. cappuccino);
• Wait for milk delivery;
• To confirm the dose of milk, press the cappuccino key again.
• Wait for coffee delivery;
• To confirm the dose of coffee, press the cappuccino key again.
10.2.1 Programming CAPPUCCINO and CAFFE LATTE
10.
DS
drink selection
The amount of cream can be modified with the regulator ( A ) located under the upper grille.
The sequence of delivery, be it first milk and then coffee or vice versa, is established in the machine
programming phase (see chapter 14 "Programming machine parameters").
i