Astoria Gloria AEP, Инструкция для пользователя

Страница: 182 / 296

34
English
DISPLAY - ASD / DS
r
o
g
Latt
e
Mac
chia
to
Hot
Milk
Cap
puc
cino
Foa
me d
Milk
Latt
e
Aut o
Ste am
er
Add
ition
al
Hot
Milk
The preparation of the machine and its installation must be carried out by qualified personnel.
Use of the machine without all the installation operations having been carried out by technical personnel
could damage it seriously.
i
3.
P
reparation of the machine
If the temperature is lower than 90° C (heating up phase), on the display appears
low
. With the program-
ming key in the ON position, the machine can be partially switched off (heating element and selections
disabled) by simultaneously pressing the keys for 3 seconds.
To put the machine back in service press again the keys simultaneously for 3 seconds.
i
please wait for
functional test
test result
- ok -
1.0 bar 120°C P
09:16 09-02-04 1
Boiler pressure Boiler temperature
Hours
Date
Day of the
week
Programming
1 - Monday
2 - Tuesday
3 - Wednesday
4 - Thursday
5 - Friday
6 - Saturday
7 - Sunday
4.
T
urning on the machine
5.
G
rinding and dosing coffee
To prevent the seal wearing too soon clean the edge of the filter before engaging the filter holder on the
dispensing unit. Do not excessively tighten the filter holder to the dispensing group.
i
Place the grinder-doser in a convenient place near the machine. Grinding and dosing of coffee must
take place in accordance with the instructions of the manufacturer of the grinder-doser. To achieve
good quality espresso coffee we suggest the following:
• Do not keep large amounts of coffee beans on hand Observe the expiry date indicated by the
producer.
• grind the volume of coffee based on use, place the amount the doser contains and if possible use
it before the end of the day;
• if possible, never buy coffee that is already ground as it expires quickly. If necessary, by it in small
vacuum-sealed packages.
Fill the filter with a dose of ground coffee (circa 6-7 gr.) and press it with the press. Attach the filter
holder to the dispensing group.
• The machine is ready for use when the following message is displayed:
• Press the main switch ( 14 ) of the machine;
• Wait for possible automatic re-filling of water in the boiler;
• Wait a few seconds longer for the auto-test to be carried out;
14