Astoria Gloria AEP, Инструкция для пользователя

Страница: 189 / 296

41
English
DISPLAY - ASD / DS
ENGLISH
Function not active.
BOILER PRESSURE
0.0 bar is=0.0
12.
B
oiler pressure
To interrupt the washing cycle before it has finished press the STOP button .
To keep the cappuccino maker and its hydraulic circuit in perfect working order, it is advisable to
perform washing regularly.
Voluntary washing is possible only if the cappuccino maker has been enabled (see para. 14.11).
i
The machine periodically suggests washing the milk circuit and the cappuccino maker.
This signal depends on the type of programming setting (see chapter 14).
To carry out washing proceed as follows:
1) Place the milk tube in cold water;
2) Press the key for three seconds (with programming key in the OFF position);
3) Wait for the washing cycle to be carried out (this takes roughly 30 seconds);
PRESS button
"ADD. hot MILK" 3 sec.
Put MILK TUBEs
IN the WATER
WASHING
CAPPUCCINO MAKER
Additional
Hot Milk
13.1 Washing requested
13.
W
ashing
To perform washing of the milk circuit and of the cappuccino maker at any time, proceed
as follows:
1) Immerge the two milk tubes in cold water;
2) Press the key for three seconds (with programming key in the OFF position);
3) Wait for the washing cycle to be carried out (this takes roughly 30 seconds);
PRESS button
"ADD. hot MILK" 3 sec.
Put MILK TUBEs
IN the WATER
Additional
Hot Milk
13.2 Voluntary washing
To adjust milk foaming with the ASD system, proceed as
follows:
• Use a wrench to unscrew component (
A
) of the ASD
steam nozzle;
• Use a screwdriver on the screw ( B ) located inside the part:
- to reduce foaming turn clockwise
- to increase foaming turn counter-clockwise
11.3 MILK FOAMING adjustment
A
B