Astoria Gloria AEP, Инструкция для пользователя

Страница: 154 / 296

6
English
ACCESSORIES
Cappuccino maker
• Put the suction tube inside the milk ;
• place the jug under the spout of the cappuccino maker ;
• turn the steam tap counter-clockwise, upon reaching the desired
amount, close the steam tap
;
• pour the foamed milk into the cups with coffee .
3-cup spout
To deliver 3 cups of coffee simultaneously, use the 3-cup spout (use about 21 gr. of ground coffee).
A
ccessories
1
position
Hot milk
position
Cappuccino
Milk foaming nozzle
• Insert the nozzle ( A ) in the milk so that the sprayer is com-
pletely covered ;
• turn the steam tap ( B ) counter-clockwise ;
• wait for the milk to heat and foam ;
• upon reaching the desired temperature and foaming turn
the steam tap (
B ) clockwise .
To adjust milk foaming proceed as follows:
• Use a wrench to unscrew component ( A ) of the milk foaming
nozzle;
• Use a screwdriver on the screw ( D ) located inside the
part:
- to reduce foaming turn clockwise
- to increase foaming turn counter-clockwise
r o
g
A
B
C
D
To keep the milk foaming device in perfect
working order, it is advisable to carry out a
delivery dry run after each use.
Keep the ends of the of the nozzle clean at all
times by means of a cloth dampened in lukewarm
water.
Use the utmost caution with the milk foaming
nozzle, as high-temperature steam is present.
i
To obtain delivery of warm milk without foam, lift the tab ( 1 )
upwards. For better results, we suggest not dispensing directly into
the coffee cup, but into a jug or pot, then putting the foamed milk
with the coffee .
Be sure the cappuccino maker is kept clean as described in the
chapter "Cleaning" .
i