USER manual
48
of
216
6.5.3
“AEP” version
•
Place a cup/demitasse under the group’s dispensing spout.
•
Press the desired dispensing button
: the machine
will start dispensing coffee; when the desired amount of
coffee has been dispensed into the cup, press the switch
again to stop dispensing.
6.5.4
“SAE - DISPLAY” version
DISPENSING COFFEE
•
Place a cup/demitasse under the group’s dispensing spout.
•
Press the desired dose button, e.g.
and wait for the
coffee to be dispensed (LED will switch on).
•
To stop the coffee dispensing ahead of time, press the
or
button.
Should an anomaly occur or the push button panel
freeze, use the manual switch (see the "AEP" ver-
sion).
PROGRAMMING THE COFFEE
Each dose must be programmed with freshly
ground coffee and not with previously-used coffee
grounds.
The machine is programmed by default. Should the coffee
doses need to be modified, proceed as follows:
•
Always programme the pushbutton panel of the right-
most group first. This way, all the pushbutton panels will
be automatically programmed. If necessary, subsequently
programme the others.
•
Place a cup/demitasse under the group’s dispensing spout.
•
Press the
button for at least 5 seconds, until all the
dose button LEDs are lit.
•
Press the dose button that you would like to programme,
e.g.
(the button will flash whilst it is being pro
-
grammed).
• To confirm the dose, press the
button again or the
button.
•
If desired, repeat this operation for the other dose but-
tons.
•
When the programming is complete, press the
but-
ton until all of the LEDs on the push-button panel go off.
All the groups will now be programmed this way.
Should you wish to programme them differently,
proceed to singularly programme the left-hand
groups one by one as illustrated above.
6.6 Dispensing steam
The steam dispensing method is different for each machine
type; therefore, the instructions specific to the model being
used must be followed.
To optimally froth the milk, follow these simple rules:
• Only heat the amount of milk that you intend to use; once
heated, it will have to be completely poured out of the jug
and cannot be reheated.
•
Froth the milk which should be at a temperature of around
4°C.
In any case, before proceeding to dispense steam, the follow-
ing precautions must always be followed.
Содержание 1GR
Страница 215: ......
