
40
A
dvanced
S
ensor
T
echnologies,
I
nc. U.S.A.
Website:
www.astisensor.com
IOTRON
TM
Trademark of ASTI
IOTRON
TM
pH / ORP / ISE / DO / Conductivity Measurement Products Lines
REMOTELY Downloading Logged Data from Touchscreen Controller
In addition to accessing logged data by removing the USB flash drive and following instructions on the
previous pages the touchscreen controllers also allow for the logged data as detailed in the previous
pages to be accessed remotely via FTP. This can be done on a local subnet, a public IP or securely
behind a firewall using EZ Access 2.0. Instructions are below for how to access this logged data.
Note that data cannot be deleted but rather only downloaded.
Note 1: Determine the IP address of the HMI. You can find the IP address by opening the “System
Information” window from the System Toolbar in HMI. For purposes of this instruction set we shall
assume the HMI is on a local subnet with the IP address 192.168.1.50 although you will need to find
the actual IP address of your machine. If using EZ Access 2.0 you will need to note the IP address
that was dynamically assigned when you connect to the desired HMI and use that IP address.
Note 2: Make sure your computer is connected to the same local area network as the HMI.
Note 3: If connecting to HMI directly from Ethernet port on your computer, you must use an ethernet
crossover cable. If going through an Ethernet switch, you can use a straight- thru or crossover cable.
From Windows Explorer or Web Browser:
1.
Enter the following address, using the IP address of the HMI:
ftp://uploadhis:[email protected]
2.
111111 is the default “Upload history” password. If your password differs from the default please
use the ACTUAL password set in your HMI.
It is STRONGLY recommended to change the
upload history password from the default for best security practice.
3.
Press “Enter.” Click on
“usbdisk”
and then the actual USB flash drive present (typically
“disk_a_1”
)
4.
Click on the folder names (Directory) to access the individual files. Click on a file to download it
to your computer. With this remote access method files are downloaded individually.
In addition to downloading data from Windows Explorer or Web Browser it can also be accessed
from any FTP client such as FileZilla (filezilla-project.org/).
Using an FTP client has the advantage
of being able to download multiple files automated in batch.
The settings would be as follows:
Host:
192.168.1.50 (use ACTUAL IP address when logging in to your particular HMI)
Encryption:
None (Plain FTP)
User:
uploadhis
Password:
111111 (use your ACTUAL password if it differs from the default)
Last Modified August 16, 2019