24
A
dvanced
S
ensor
T
echnologies,
I
nc. U.S.A.
Website:
www.astisensor.com
IOTRON
TM
Trademark of ASTI
IOTRON
TM
pH / ORP / ISE / DO / Conductivity Measurement Products Lines
“Controller Info” Menu
The system time and date is shown based upon what
was loaded at the factory at time of dispatch.
The warranty period for the controller begins from
the ship date from factory which is indicated by the
serial number that is assigned on the label. You may
be asked to give the software revision number and
build date as displayed in this “Controller Info”
screen for support and diagnostic purposes.
If your local time zone differs use the onscreen tools
to adjust the time as appropriate to obtain the correct
local time.
There exists a “Factory Reset” button available from this
“Controller Info” screen. You must confirm reseting the
controller back to factory default values.
NOTE THAT THE FACTORY RESET FOR ALL
MEMORY REGISTERS CANNTO BE UNDONE!
PLEASE CONSULT WITH FACTORY BEFORE
INVOKING THIS FACTORY RESET.
All settings are stored in retentive registers to allow for
configuration to be maintained in the event of a power
loss or planned shutdown (with the sole exception of the
time delay for the alarms which will revert back to zero).