INVENT3D Printer Kit Disassembly Instructions
AST2 © 10/26/16 9
14.
Remove front cover with LCD screen. Remove the LCD screen from the front cover.
Store the LCD screen in the location as shown in Case Layer Drawing 2. Place the front
cover in the location as shown in Case Layer Drawing 4.
15.
Remove orange thumbscrews and RAMBo board from bottom frame plate. Place the
RAMBo board in the location as shown in Case Layer Drawing 1 with fan wiring coiled.
Store the orange thumbscrews in the plastic case for z-axis and frame components as
shown in Case Layer Drawing 1.
