INVENT3D Printer Kit Disassembly Instructions
AST2 © 10/26/16 10
16.
Remove silver thumbscrews and extruder top. Store the extruder top in the location as
shown in Case Layer Drawing 1. Place the silver thumbscrews in the plastic box for x-
axis components shown in Case Layer Drawing 1.
17.
Remove the extruder motor from its seating on the extruder bottom. Remove the
filament drive from the extruder motor and replace the filament drive mounting
hardware in the extruder motor. Coil the extruder motor wire around the base of the
motor and store in the location as shown in Case Layer Drawing 3. Store filament drive
in location as shown in Case Layer Drawing 1.
