INVENT3D Printer Kit Disassembly Instructions
AST2 © 10/26/16 8
10.
Carefully remove all wiring from RAMBo board except for fan wiring. Be sure to depress
latches for plugs that have latches – the plugs should be easy to remove with latches
depressed.
11.
Remove rear cover. Detach power plug breakout board from rear cover by removing set
screw. Reattach set screw to power plug breakout board clip. Store rear cover in
location as shown in Case Layer Drawing 4. Store power plug breakout board in location
as shown in Case Layer Drawing 3.
12.
Remove black mini-thumbscrew and HOT! sign. Store the HOT! sign in plastic box for
hot end components as shown in Case Layer Drawing 3. Store the black mini-
thumbscrew in the plastic box for x-axis components as shown in Case Layer Drawing 1.
13.
Disconnect fan wires from hot end. Remove all wires from circular cutouts in left and
right frames. Remember that the fan wires stay attached to the RAMBo board.
