INVENT3D Printer Kit Disassembly Instructions
AST2 © 10/26/16 2
I. General Disassembly Instructions
Use the case layer drawings to ensure that components are stored in the appropriate
location
Use the appropriate size Allen wrench to loosen thumbscrews that are too tight to
loosen by hand
Unless otherwise noted, printer kit components and subassemblies are not to be
disassembled; disassembly should return the printer kit to the same condition in which
it arrived.
Screws that are black anodized should not be removed.
II. Case Layer Drawings
The following Case Layer Drawings depict the layout and contents of each layer of components
within the INVENT3D printer case. These drawings are labeled from the top down within the
case, meaning Layer 1 is the top layer and Layer 4 is the bottom layer. Please review these
drawings prior to disassembly and reference these drawings throughout the disassembly
process to ensure that all components are stored in the appropriate locations.
