INVENT3D Printer Kit Disassembly Instructions
AST2 © 10/26/16 15
23.
Remove blue thumbscrew and front clamp from front of print board plate. Remove red
thumbscrews that attach print board plate to diamond plate and remove print board
plate. Remove rear clamps from print board plate, and reinsert mounting hardware into
the print board plate. Remove print board spacer and springs. Place springs on red
thumbscrews and reinsert into print board plate. Place front and rear board clamps,
print board spacer, and blue thumbscrew into the plastic case for y-axis components as
shown in Case Layer Drawing 1. Place print board plate in location as shown in Case
Layer Drawing 3 underneath other components in this location.
