(BESA-12V24G) User Manual
Version GS 17628
2
Version GS 17628
2. Grounding Test:
Same as battery test, this test is also meant for 12V batteries only.
Analyses the condition of the electrical return circuit contacts resistance which were connected to the
engine or chassis body from the battery terminal with results and recommendations display after test.
3. Starter Test:
This Test can be performed on 12V and 24V Starters.
Checks the cranking effectiveness of the battery to predict when the battery will fail to crank a vehicle
basing on voltage profiles with results and recommendations display.
4. Alternator Tests (with diode ripple test):
This test can be done on 12V and 24V Alternators (Normal or Smart).
These tests check the alternator charging conditions during load at 1,500 ~ 2,000 RPM, without load
at 2,500 ~ 3,000 RPM and the diodes ripple volts with results and recommendations display after
each test. This test will determine whether the alternator is performing its job properly.
Specifications:
Operating Voltage:
9V ~ 36V DC (max)
Test Functions
12 Volts:
Battery test, Starter test, Alte Diode ripple & Grounding tests
24 Volts:
Starter test, Alternator test (Smart and Normal alternator)
Analyzing Capacity (Amps):
Automotive 12V Batteries:
CCA/SAE:
100A ~ 2000A
EN1: 100A ~ 2000A
CA/MCA:
100A ~ 2000A
EN2: 100A ~ 2000A
IEC:
100A ~ 2000A DIN: 100A ~ 2000A
JIS#:
100A ~ 2000A
Motorcycle 12V Batteries:
CCA/SAE:
40A ~ 600A
EN1: 40A ~ 600A
CA/MCA:
40A ~ 600A
EN2: 40A ~ 600A
IEC:
40A ~ 600A
DIN: 40A ~ 600A
JIS#:
40A ~ 600A
DC Volts Accuracy:
± 1% Reading
Battery analysing time:
Less than 8 seconds.
Maximum key-in:
17 characters
Safety:
Reverse polarity protected. Analyser will not power ON.
Internal Memory storage:
Store up to 70 Test Results.
PC communication:
Through USB port.
Printer:
Built-in
Printer head:
Thermo unit.
Paper width:
57.5mm
±
0.5mm
Paper roll diameter:
Max. 45mmO.D
Printing Speed:
50mm/sec
Working Temperature:
0ºC (32
°
F) ~ 50ºC (122
°
F)
Working Humidity:
10% ~ 80 %
Approvals:
CE, ROHS
