(BESA-12V24G) User Manual
Version GS 17628
12
Version GS 17628
11.
To enter the value, press
or
key will increase or decrease the original value shown on the display by
100 units. Likewise use
or
key to increase or decrease the last two digits step of 5 units for each press.
See Fig.25 below.
12. Once the Amps rating of the battery is confirmed, press key will start the testing process. Refer to
the display below (Fig.26):
13. For less than 8 seconds, the results of the testing will be displayed on the LCD screen (Fig.27) if the
battery condition is very good (e.g. having more than 75% Life).
14. This Analyser will also takes the temperature of the battery into consideration when it has detected that
the battery condition is marginal(SOC below 75%) and it will prompt you with the display as shown ( Fig.
28) below:
Here it let you to select the surrounding temperature that you are working with the battery. If the
surrounding temperature is for example 15
°
C, then select and press key. Then the results
will show on the LCD display (Fig.27).
15. Sometimes the analyser will prompt and ask whether the battery has been charged or before charge (Fig.
29) during the testing. Selecting “Before charge” or “After charge” will determine its final test results.
Battery Result
State of Charge (SOC)
Rated CCA
Measured CCA (Power Available)
Internal Resistance
Life [Health]
Fig.25
Fig.26
Fig.27
Fig.28
(+) 0°C and above
(-) 0°C and below
Before charge
After charge
Fig.29
500
CCA
12.65 V
[560 CCA]
480 CCA
8.65 m
Ω
79 %
