(BESA-12V24G) User Manual
Version GS 17628
10
Version GS 17628
Starter Test
Actual Test
Displayed
Grounding Test
Alternator Test
Selecting will allow you to test car Batteries (up to 2000A) whereas will only test
Motorcycle Batteries (up to 600A) only.
Here if you have selected test, then there is an option to select Battery or other system
test. See display below (Fig.20).
Select for Battery test and then press key.
5. If the tester detected that the battery has surface charge it will prompt you to turn the ignition key to ON
and switch on the headlights (Fig.21) to discharge the battery until it has reached to the next display that
shows turn ignition OFF and headlights OFF (Fig.22) as display shown below and then press to
continue.
6. Next it will prompt you to select the types of batteries (Fig.23) :
WET
(SLI)
battery is meant for all normal flooded types like Wet Low Maintenance (Lead [Pb] / Calcium
[Ca]) or Wet Standard (Lead [Pb] / Lead [Pb]) Batteries.
AGM FLAT / SPIRAL
tests on Wet (MF) Maintenance Free (Calcium [Ca] / Calcium [Ca]), AGM flat or
spiral plates Batteries.
Fig.21
Fig.22
Fig. 23
Fig. 20
Turn ignition key OFF
position
High Beams OFF
Turn ignition key
to ON position
High Beams
turn ON
