(BESA-12V24G) User Manual
Version GS 17628
19
Version GS 17628
2. Connect the tester to the battery terminals and the displays will light up as shown below.
From the main MENU (Fig.42), select by scrolling left using
key
Press key to continue and the display will show:
Note: In event that you did not crank the engine while on this screen; the starter test will
be terminated after 30 seconds and return to the main menu.
3.
Now switch the ignition key to ON and start cranking the engine until it starts.
As soon as the engine
starts, the results will automatically display as shown in examples below :( Fig.44 or Fig. 45)
Note:
9.6 Volt is the voltage drop limit for 12V system whereas 19.2Volt is for 24V system. Voltage drop
more than the limits mentioned are considered bad.
Normal voltage
drop
State of charge
voltage (depends
whether 12V or
24V battery)
before cranking
High voltage drop
Less than 9.6V
Fig.42
Fig.43
Wake up screen
Select Continue test
and press key
Select Automotive
and press key
Fig. 45
Fig. 44
Starter Test
10.36V
9.36V
OR
