6
First Time Easy Set-up
• Any omissions or mistakes can be rectified
later. Once the first time install has been
successfully completed it will not be shown
again.
• More advanced programming can be done
at a later stage including adding and naming
sensors and changing various settings.
Connect the mains power adaptor to the control
panel (in the intended location). After the welcome
screen, the display will show:
3 Steps easy
setup (ok?)
Press OK (
3
) to continue. You are 3 steps away
from completing the initial set-up.
3
The installation guide will provide you with prompts to easily set-up the system.
i
1. Set Time/Date
Set date/time
(ok?)
Press OK (
3
) to continue.
Set date,press
ok when done(ok)
Press OK (
3
) to continue.
date setting
01 jan (
pq
OK)
Set the current month using the
p
/
q
key.
Press OK (
3
) to confirm setting. Set the day
using the
p
/
q
key.
Press OK (
3
) to confirm
setting. After setting the day, it will now
prompt you to set the time.
Set the current time using the
p
/
q
key.
Press
OK (
3
) to confirm the hour, follow by setting
the minutes.
2. Set the phone number to alert
Set 1 phone num
for alert (ok?)
Enter a phone number to be alerted in the
event of an alarm.
Press “Up arrow” key for
+
key or enter
numbers.
Press OK (
3
) to continue.
Press Return button to clear the entered
number or skip if you do not want any alert
through the phone.
3. Set the Pincode
Set pin code
....
Enter the four digit pincode you would like to
use (e.g. 1234). Press OK (
3
) to continue.
