10
About your alarm system (default settings)
To set up more telephone numbers (maximum
6 in total), please see Chapter 5, Tel. Settings.
i
To change, please see Chapter 5, Adv.
Settings, Alarm Length.
i
To change the exit and entry timer, see Chapter
5, Adv. Settings.
To change the property of individual sensor (i.e.
Burglar attribute where the individual sensor will
instantly alarm when triggered), see Chapter 5,
Devices, Edit Devices.
Home arming is disabled by default. If you need
Home arming function, see Chapter 5, Home-
arm set.
i
All accessories were pre-set to
“entry” attributes.
When the system is first armed, user will have 30
seconds to exit the building. System will ignore any
sensors triggering in this duration.
If the system is already armed, triggering any
sensors will cause an entry countdown to begin.
When the alarm is triggered, the
system will dial out to alert the
owner.
Siren length is set to 3 minutes.
Jamming and interference
detection disabled as default.
If Jamming and interference is of concern,
please see Chapter 5, Adv. Settings, Jamming
Det for option.
i
