Assa Abloy Sentinel Digital Ph III RF-Online, Руководство по модернизации

Страница: 9 / 23

October 11, 2011 Page 9 of 22 66 3081 018-4
3 RF-Online safe usage
Note:
The RF-Online safe can only be connected to an existing ZigBee network.
3.1 Connecting an RF-Online safe to the network
Note:
Before connecting the safe to the network, the safe must have been commissioned.
To allow the safe to join the ZigBee network, the concerned ZigBee router or gateway must be ‘open’.
This is performed in the software SysMon (System Monitor); see 3.1.1. Follow the steps in sections 3.1.2
and 3.1.3 for joining the safe to the network.
3.1.1 Starting SysMon
1. Double click on SysMon.exe in the VISIONLINE installation folder.
2. Log on with the same user name and password as for VISIONLINE.
Tip:
Create a shortcut to
SysMon.exe
since this program will be extensively used.
3.1.2 Opening the concerned gateway or router for joining
1. In the SysMon menu
View
, select
ZigBee
; the
ZigBee Network
window which is shown.
2. Right click on the applicable gateway/router in the ZigBee Network window and select
Permit Joining . The gateway/router is now ‘open’. It will remain in this status for
approximately 15 minutes or until a forbid join command is executed.