Assa Abloy Sentinel Digital Ph III RF-Online, Руководство по модернизации

Страница: 10 / 23

October 11, 2011 Page 10 of 22 66 3081 018-4
3.1.3 Setting the safe in discovery mode
To be able to connect to the open router or gateway, the RF-Online safe must be set in discovery mode:
1. With the gateway/router open from the steps performed in section 3.1.2, connect the Universal
Safe Interface (PinKey, ElKey or IR interface) to the service socket of the safe. Depending on
what interface that is used, the display of the safe will show
•
‘ Ser’ (if PinKey is used)
•
‘Ir’ (if the IR interface is used)
•
‘Open’ (if ElKey is used)
2. Press and hold the Reset and 3 buttons down simultaneously. ‘dISC’ should appear on the display.
3. Release both buttons; the safe is now in discovery mode.
4. Wait for a couple of seconds and then press and hold the
Reset
and
5
buttons downsimultaneously.