8/05/12
3
Copyright © 2012, Sargen
t Manufacturing Company
, an A
SS
A AB
LO
Y G
roup company
. All right
s reser
ved
.
Reproductions in whole or in par
t without express writ
ten permission of Sargen
t Manufacturing Company is prohibited
.
PR100 Exit Devices
Warning: SARGENT Mfg. Co. PR100 locksets utilizing a door position switch (DPS) are not rated for,
or intended for use in life safety applications.
!
To comply with “Fire Listed” doors, the batteries must be replaced with alkaline batteries only.
General Description
Electronic Specifications
2
3
4
PR100 Rim Exit Device
•
Deadlatch – 3/4” throw, stainless steel
•
Outside motor driven “ET” lever controlled
by keypad
•
Push bar retracts latch from inside
•
Fire stop provided on all lever handle designs
•
PR100 exit devices furnished for
1-3/4” doors
•
UL Listed
•
Accepts all SARGENT rim cylinders (8877 only)
•
Key retracts latch (8877 only)
•
Available in “ET” lever handle designs only
•
Outside lever is controlled by any combination
of keypad, credential reader, or mechanical
cylinder
PR100 Mortise Exit Device
• Latch – 3/4” throw, anti-friction, brass
• Outside motor driven “ET” lever controlled by keypad
• Push bar retracts latch from inside
• Fire stop provided on all lever handle designs
• PR100 exit devices furnished for 1-3/4” doors
• UL Listed
• Accepts all SARGENT mortise cylinders (8977 only)
• Key retracts latch (8977 only)
• Available in “ET” lever handle designs only
• Outside lever is controlled by any combination of keypad,
credential reader, or mechanical cylinder
The SARGENT® PR100 lock with Aperio™ Technology makes it easy and cost-effective to bring access control
to additional doors. It uses local wireless communication between the lock and an Aperio hub to connect to
an access control system, eliminating the greatest cost and inconvenience of traditional access control – the
wiring at the door. The PR100 is available with HID® 125 kHz proximity or iCLASS® 13.56 MHz smart card
technology, and all technology features are supported by the physical security of SARGENT ANSI/BHMA Grade
1 hardware.
This product is powered by six (6) “AA” alkaline batteries. SARGENT exit devices are designed with quality
components to provide high security, performance and durability.
The PR100 exit device may be used for both indoor and exterior applications. A weather-protective
gasket is required for exterior applications.
HID and iCLASS are registered trademarks of HID Global Corporation.
Specifications
Lock
•
IEEE 802.15.4 UHF interface
•
AES 128 bit encryption
System Overview
5
Access Control Panel
Aperio Hub
Electronic Access
Control System
TCP/IP
RS-485/Wiegand
IEEE 802.15.4
(2.4GHz)
When a user presents a supported credential to
the lock, the Aperio system is designed to send
the credential wirelessly to the Aperio Hub. The
Aperio Hub (wired through RS-485 or Wiegand)
then communicates with an EAC (Electronic
Access Control) system. The EAC system provides
the access decision to the Aperio Hub where
access to the lock is either granted or denied.
Credential Support
•
HID 13.56 MHz iCLASS (full authentication, all
formats)
•
HID 125 kHz prox
