8/05/12
17
Copyright © 2012, Sargen
t Manufacturing Company
, an A
SS
A AB
LO
Y G
roup company
. All right
s reser
ved
.
Reproductions in whole or in par
t without express writ
ten permission of Sargen
t Manufacturing Company is prohibited
.
PR100 Exit Devices
1. Route ET harness through wire route slot for wood doors (Fig. 4A)
and access hole for metal doors (not shown).
Note: Make sure no wires are pinched.
2. Engage ET spindle in the hub of exit
device chassis.
3. Secure chassis and ET with (2) 1/4-20 x
2-3/8" flat head machine screws.
4. Connect ET harness and connector
from chassis (Fig. 4B)
4 Secure Inside Trim and Chassis
Outside of Door
Showing Wood Door Template
With Cylinder Hole
Fig. 4B
4
3
Inside of Door
1
2
Fig. 4A
