background image

5 5

5 5

5 5

5 5

5 5

4.

4.

4.

4.

4. Software Suppor

Software Suppor

Software Suppor

Software Suppor

Software Supporttttt

4.1 Install Operating System

4.1 Install Operating System

4.1 Install Operating System

4.1 Install Operating System

4.1 Install Operating System

This motherboard supports various Microsoft

®

 Windows

®

 operating systems:

2000 / XP / XP Media Center / XP 64-bit / Vista

TM

 / Vista

TM

 64-bit. Because motherboard

settings and hardware options vary, use the setup procedures in this chapter for

general reference only. Refer to your OS documentation for more information.

4.2 Support CD Information

4.2 Support CD Information

4.2 Support CD Information

4.2 Support CD Information

4.2 Support CD Information

The Support CD that came with the motherboard contains necessary drivers and

useful utilities that enhance the motherboard features.

4.2.1 Running The Support CD

4.2.1 Running The Support CD

4.2.1 Running The Support CD

4.2.1 Running The Support CD

4.2.1 Running The Support CD

To begin using the support CD, insert the CD into your CD-ROM drive. The CD

automatically displays the Main Menu if “AUTORUN” is enabled in your computer.

If  the Main Menu did not appear automatically, locate and double click on the file

“ASSETUP.EXE” from the BIN folder in the Support CD to display the menus.

4.2.2 Drivers Menu

4.2.2 Drivers Menu

4.2.2 Drivers Menu

4.2.2 Drivers Menu

4.2.2 Drivers Menu

The Drivers Menu shows the available devices drivers if the system detects the

installed devices. Please install the necessary drivers to activate the devices.

4.2.3 Utilities Menu

4.2.3 Utilities Menu

4.2.3 Utilities Menu

4.2.3 Utilities Menu

4.2.3 Utilities Menu

The Utilities Menu shows the applications software that the motherboard supports.

Click on a specific item then follow the installation wizard to install it.

4.2.4

4.2.4

4.2.4

4.2.4

4.2.4 Contact Information

Contact Information

Contact Information

Contact Information

Contact Information

If you need to contact ASRock or want to know more about ASRock, welcome

to visit ASRock’s website at http://www.asrock.com; or you may contact your

dealer for further information.

Содержание ALIVEDUAL-ESATA2


























































Отзывы: