4 4
4 4
4 4
4 4
4 4
OnBoard UAA Audio
Select [Auto], [Enabled] or [Disabled] for the onboard UAA Audio feature. If
you select [Auto], the onboard UAA Audio will be disabled when PCI Sound
Card is plugged.
AGP Data Rate
Use this item to adjust the AGP Data Rate. Configuration options: [8X], [4X].
The default value is [8X].
AGP Aperture Size
It refers to a section of the PCI memory address range used for graphics
memory. It is recommended to leave this field at the default value unless the
installed AGP card’s specifications requires other sizes. Configuration options:
[32MB], [64MB], [128MB], [256MB], and [512MB].
AGP Fast Write
This allows you to enable or disable the feature of AGP fast write protocol
support.
AGP SideBand Address
This allows you to enable or disable the feature of AGP SideBand Address.
Configuration options: [Enabled], and [Disabled].
Primary Graphics Adapter
This item will switch the PCI Bus scanning order while searching for video
card. It allows you to select the type of Primary VGA in case of multiple video
controllers. The default value of this feature is [PCI]. Configuration options:
[PCI], [PCI Express] and [AGP].
CPU - NB Link Speed
This feature allows you selecting CPU to NB link frequency. Configuration
options: [Auto], [200 MHz], [400 MHz], [600 MHz], [800 MHz] and [1000 MHz].
CPU - NB Link Width
This feature allows you selecting CPU to NB link width. Configuration options:
[Auto], [8 bit], and [16 bit].
NB - SB Link Speed
This feature allows you selecting NB to SB link frequency. Configuration options:
[Auto], [200 MHz], [400 MHz], [600 MHz] and [800 MHz].
NB - SB Link Width
This feature allows you selecting NB to SB link width. Configuration options:
[Auto], [8 bit], and [16 bit].
DRAM Voltage
Use this to select DRAM voltage. Configuration options: [Auto], [1.80V],
[1.85V], [1.90V], [1.95V], [2.00V], [2.10V], [2.15V] and [2.20V]. The default
value is [Auto].
AGP Voltage
Use this to select among [Low] and [High] for AGP Voltage. The default
value is [Auto].
