
SECTION IV PREPARATION FOR USE AND INSTALLATION
- 4-3 -
4.2
INSTRUMENT CONNECTIONS
Detailed connection instructions are provided in the A-2000 Operating Manual, Section III.
4.2.1
Digital Signal Converter Connections
The long flexible cable from the A-2000 Digital Signal Converter connects to the
electrically isolated digital signal converter connector on the front panel of the monitor.
Once connected, the DSC need not be disconnected again. However, if you wish to
disconnect the DSC cable from the monitor, carefully reach as far as possible into the port
opening with your thumb and index finger, squeeze and pull back on the gray cylindrical
connector housing. Do not twist or pull on cord.
4.2.2
Power Cord Connections
The A-2000 is designed to use only 3 - conductor IEC hospital-grade power cords. Check
for a firm connection.
4.2.3
Printer Connector
This printer port connector is designed to connect only to the Aspect A-2000 printer for
screen prints. To connect:
1. Turn OFF the monitor.
2. Align the printer connectors located on the bottom of the monitor and top of the printer
so that they mate correctly.
3. Secure the printer to the monitor with the mounting screw located in the base of the
printer. Use caution not to cross-thread the mounting screw.
4. Turn on the monitor.
Содержание BISPECTRAL INDEX A-2000
