ASP ClassNet, Руководство пользователя

Страница: 18 / 20

ClassNet Terminal User Manual
16
Display Codes and Messages
When a ClassNet Terminal is turned on, it displays the
ASP
signon
message, then
F-nn
where nn is the firmware revision number, then
U-nn
where nn is the network ID number of the ClassNet Terminal.
While the ClassNet Terminal is operating normally (ie it’s displaying the
time), if you press the hidden button then release it, the number of scans
stored in memory since the last download is displayed. If you press the
hidden button and hold it down, the number of scans, the network
number and the firmware revision number are displayed in sequence until
the button is released.
If you press the hidden button and then read a TimeTag while you are
still holding the button down, the ClassNet Terminal enters the Network
ID Setting mode.
Listed below are the various messages that may be displayed on the
ClassNet Terminal, along with a brief explanation of what they mean:
ASP
This is what ClassNet Terminal displays at power up.
CARD
A barcode has been scanned.
TAG
An IDTag tag has been read.
Stop
This barcode or IDTag has already been read since the last download,
and therefore has not been stored again.
POLL
Data is being retrieved from the ClassNet Terminal. Wait until the
time display returns before using the terminal.
CLR
The download has finished, storage memory has been cleared, and
the internal clock has been synchronised.
SET
The internal clock has been set using a TimeTag.
DONE
A DataTag download is finished.
FULL
Storage memory is full. You must download the stored data before
you can make further scans.
LOAD
The DataTag that you’re downloading data into is full. You should
take this tag back to a PC and retrieve the data from it.
U-nn
Shows the current network ID number (nn can be a number from 01
to 98), or allows the network number to be set.
F-nn
Shows the version of the firmware loaded into the terminal (where
nn is the version number).
ERR1
This message signals that an internal error has occurred – the main
CPU is not functioning correctly.
ERR2
At power up, the storage memory area was found to be invalid, and
has therefore been cleared and initialised.
ERR8
You were downloading data into a DataTag, and the DataTag was
removed before downloading was completed. You should put the
DataTag back to continue the download.
ERR9
The DataTag that you’re trying to download data into is not
formatted correctly.