12
Power Jack:
To connect the included power adapter.
Audio Input (Red):
The 3.5mm jack allows connect to a microphone or audio
source, the connected audio will be heard at the remote site.
Audio Output (Green):
The 3.5mm jack allows connect to an amplified speaker, you
can hear the voice of the remote site from the speaker.
RS485 Connector:
The terminal block allows connect to an external keyboard.
Analog Video Output:
The BNC connector allows connect to the analog display to
output analog video for locally monitoring.
I/O Connector:
This connector allows connect to the extend cable (included)
and provides the following outputs:
Brown: Digital Input 1
Gray:
Digital Input 2
White: GND
Black:
GND
Red:
+5V
Green: Digital Output 1
Orange: Digital Output 2
Blue:
GND
Yellow: Hardware Reset
Violet:
GND
Network Connector:
The RJ-45 connector allows connect the Ethernet cable.
Cables Connection
1. Connect the cable of Digital I/O, Video output, Audio output and Audio input if you want
to use these functionalities.
2. Connect Ethernet cable for network connection.
3. Connect power adapter to turn on the camera.
4. If the camera is PoE model, the power adapter is not necessary. The camera will get
the power from the PoE injector or PoE switch.
