42
Wireless Setting
The Wireless model supports Wireless network connection, set the parameters in this
page.
Note: Wireless network and Ethernet network use the same IP, user has to unplug
Ethernet cable to activate the Wireless connection. If Ethernet cable is plugged,
Wireless connection will be stopped.
Found Wireless Networks
The Wireless model will automatic search the available Wireless network and list in
the SSID table. Please refer to the table to set the Wireless settings.
Wireless Setting
Mode:
Select the mode of the connection from the pull-down list.
“Infrastructure” is for
connecting with the router. “Ad-hoc” is for connecting with PC directly.
Operation Mode:
Select the mode from the pull-down list.
SSID:
Choose a Wireless network from the SSID table, and type the SSID in the box.
The SSID is case-sensitive.
Security:
Select the security mode to match the Wireless network. It supports “None”,
“WEP”, “WPA-PSK”, “WPA2-PSK” security encryption based on the setting of Router.
Ad-hoc
Ad-hoc is for connecting with PC directly. There is “Channel” to selected only when
uses Ad-hoc mode. For example, if PC’s channel is 6, the “Channel” has to be 6 too.
Wireless
